Turbosound Milan M15B 2200-Watt Powered Subwoofer

Turbosound Milan M15B 2200-Watt Powered Subwoofer
Enquire about this product


Turbosound Milan M15B 2200-Watt Powered Subwoofer

The Turbosound Milan M15B 2200-Watt Powered Subwoofers has been completely re-engineered from the ground up. It combines improved performance with ultimate convenience for musicians, DJs and AV applications in a range of stylish portable powered loudspeakers with an unmistakable sound signature enhanced by the industry's most sophisticated DSP

 Turbosound Milan M15B 2200-Watt Powered Subwoofer Features

* High performance 2,200 watt bandpass subwoofer
* Sophisticated Class-D amplifier
* Left and right stereo inputs and outputs
* Lightweight birch plywood cabinet

The Turbosound Milan M15B 2200-Watt Powered Subwoofer is compact powered 15” bandpass subwoofer that extends the frequency range and increases the overall loudness of any Milan system.

The bandpass design produces high bass energy within the pass band, which is tuned to reinforce bass instrument frequencies, and the steep cut-off slopes ensure an effective acoustic transition to Milan full-range loudspeakers.

The onboard amplifier provides over 2,200 watts of maximum output power with plenty of headroom to power the long-excursion bass driver, allowing short term transients to be reproduced with wide dynamic range. Two discrete balanced XLR inputs plus corresponding thru connections on balanced male XLR allow a stereo system comprising of two Milan full-range loudspeakers to be operated with only one subwoofer if required, the sub-bass frequencies being filtered and summed to the subwoofer drive unit. A switchable 3dB boost is available at a centre frequency between 40Hz and 90Hz, while an overall level control allows the sub-bass frequencies to be balanced with the system. A polarity switch is provided for optimum subwoofer integration. Rear panel LEDs indicate power on, signal present, and the onset of limiting action.     

 Turbosound Milan M15B 2200-Watt Powered Subwoofer Full specifications      

Net Weight 37kg (81.4lbs)
Dimensions 495mm x 530mm x 480mm
Components 1 x 15" (381mm) LF driver
Frequency Response 45Hz - 100Hz ±3dB
Maximum SPL 134dB peak (half space)
Construction Birch plywood, screwed and glued
Connectors Input: 2 x female XLR wired pin2 hot
Thru: 2 x male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder
Spares & Accessories LS-1535 15" (381mm) low frequency driver
RC-1535 Recone kit

Approximate Weight 40.0kg

* This product does not qualify for free shipping.


  Stay on Beat
 Join our newsletter